Rear Panel
4
2.2 Rear Panel
IP Connection
Network interface
LNB IN
It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL
SATELLITE RECEIVER.
LOOP
It sends signal to another receiver.
AUDIO (R,L)
It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable.
VIDEO
It provides composite video output. Connect the Video on TV to VIDEO with RCA cable.
SPDIF
Output for connection to a digital amplifier.
RF IN
The signal supplied to this connector from a TV antenna will be sent to TV antenna output. Connect a
TV antenna to TV ANT IN.
RF OUT
It provides a modulated audio and video from the receiver. Connect the TV/VCR on TV to TV/VCR
with the RF cable.
VCR
It provides composite video and audio outputs. Connect the VCR scart on VCR(or Decoder) to VCR
with scart cable.
TV
It provides RGB video and Composite video. Connect the TV scart on TV to TV.
RS-232C DATA
It receives data by connecting to PC for software upgrading. Connect with RS-232C cable a PC and
receiver.
ON / OFF
The switch is to turn on or off the main power of the receiver mechanically.
