The innovative Nanoxia Active Air Chimney makes it easy to adapt the case to your needs.
Under extreme conditions you can counteract heat generation under the top cover effectively:
The two pre-installed fans under the cover will be automatically enabled if the chimney is
opened. Thus the warm air is dissipated quickly and effectively from the case. When the air
chimney is closed, the fans will be switched off again. A groove in the bearing surface of the
Air Chimney serves as additional protection against ingress of liquids.
Standard Equipment:
Front:
2 x 140 mm Nanoxia Deep Silence fans (max. 1,100 rpm)
Top cover:
2 x 140 mm Nanoxia Deep Silence fans (max. 1,400 rpm)
Rear:
1 x 140 mm Nanoxia Deep Silence fans (max. 1,100 rpm)
Optional Equipment:
Top cover:
max. 3 x 120/140 mm (2 x pre-installed)
Side:
2 x 120/140 mm fans
Bottom:
2 x 120 mm or 1 x 140 mm fans (removal of HDD-
holder necessary)
Mounting Bracket on the HDD-cage:
2 x 120/140 mm fans
Watercooling-ready
The Nanoxia Deep Silence 6 Rev. B has been prepared perfectly for the installation of a high-
end water cooling system.
Therefore you can install radiators or a compact water cooling solution under the top cover as
well as on the specially designed mounting bracket attached to the hard drive cage:
Top cover:
120/140/240/280/360 mm radiator
The case cover has special, lateral fastening points which allow for installation of a
120/140/240/280/360 mm radiator. Please note that - depending on the manufacturer - under
certain circumstances the overhead 5.25 inch drive bay may no longer be used when using a
360 mm radiator.
Mounting Bracket on the HDD cage:
120/140/240/280 mm radiator
The mounting bracket between motherboard and hard drive cage is designed to make optimal
use of the enormous size of the Nanoxia Deep Silence 6 Rev. B for water cooling systems.
05
Summary of Contents for Deep Silence 6 Revision B
Page 1: ......
Page 22: ...Nanoxia 2014...
