3 Technical details and pin assignment
You can secure the brake chopper with screws on a plane mounting surface using the lugs on the side or
install it with the delivered DIN rail clip in your switch cabinet.
CAUTION
!
Risk of overheating or fire if the limits defined in the technical data (see
) are not observed and there is insufficient cooling!
►
During use, make certain that the cooling and environmental conditions are ensured.
►
Ensure that heat dissipation is favored by either installing the device in vertical position or —if
in a horizontal position— with the metal housing on top.
3.3 Electrical properties and technical data
Property
Description/value
Operating voltage
12 …75 V DC
Rated power @40°C
)
Power for max. 5 seconds
250 W
Max. permissible Power (for 1 second)
1 kW
Max. permissible current for internal and
external braking resistor (for 1 second)
40 A
Capacity of the integrated capacitors
(between power supply and ground)
400 µF
You can increase the continuous power up to 100 W by improving the heat dissipation and connecting an
external resistor at
. Nanotec recommends a 2.2 or 1.1 Ohm external power resistor parallel to the
internal 4.7 Ohm resistor.
Version: 1.2.0
9
