_______________________________________________________________________
S.A.R.L au capital de 500 100 Euro Siret : 444.396.519.00027 APE : 4669A TVA intracom : FR-35444.396.519
At the end, do not forget activating your Zaps in your dashboard. Now that you have a Xively
trigger activating a Zapier zap, try out few new ones!
You can also build an entire network of devices with triggers.
15.
Firmware Update
Since the EnOcean standard evolves regularly, an update OTA (Over The Air) is proposed.
New functions and interface improvement can also be proposed.
To update your firmware just click on "Update Firmware". If your system is up to date, you
will see the message below. Otherwise the message will warn you of updates that will be
made.
During the update, do not disconnect the power supply and the internet connection. The
duration of the update depends on your Internet connection and will end once the red and
green LEDs stop blinking.
16.
External antenna
The power emitted by an EnOcean chipset is very low (1 mW), this allows emitting to a range
of up to 25m indoor. A wip antenna located inside should be sufficient in most cases.
However, if the signal is too low you can add an external antenna and increase the range of
your EnOcean modules.
