720012-0000R
May 2019
15
High Speed Video Lottery Advanced Thermal
Printer
Owner’s Manual
3.
Printer Disassembly
3.1 Removing the Mech. Assembly
1. Remove the power source from the printer before disassembly.
2. Remove the paper roll from the printer by following the steps in reverse outlined in
1.5 (Changing the paper)
3. Remove the two screws holding on the plastic plate covering the main board. Slide
the cover away from the mech. assembly.
4. Remove the two screws holding on the print mechanism to the printer base.
Remove the harnesses going to the main board and lift the print mechanism.
Use ESD protection (such as a wrist strap)
anytime a PCB is exposed
Figure 9: Circuit Board Cover Removal
