EZ-Load Thermal Printer
Owner’s Manual
1.5 Testing the Printer
Run this test to check the printer. The test prints and cuts a resident test ticket. Verify
this ticket to judge the printing quality.
Model: TITANIA
Firmware: TIT-2.41G-61UCS
COMMUNICATION
Interface:
IEEE1284 (0) or Serial
Baud: 9600
Data Bits:
8
Parity: NONE
Handshaking: NONE
Print Mode:
NTL
Aux Port:
Disabled
PRINT CONTROL
Darkness Control:
-1%
Voltage: 24.2
Volts
Temperature: 26
Celcius
Speed: 4
IPS
Black Bar Index:
Disabled
SYSTEM RESOURCES
FLASH -Used:
0
-Free:
24576
LIBRARY INVENTORY
Templates: 0,1,2
Print Regions:
1,2,3,4,5,6,7,8,
h,9,A,B,C,D,E,F,G,
I,J,K,L,N,O,P,Q,R,
S,T,U,Z,X,a,b,c,d,
e,f,g,i,j,k,l,m,n,
o,p,q,
Graphics: None
Fonts: 0,3,5,7,8
MANUFACTURING INFORMATION
Printer ID:
5465789
Date Code:
20184
PWM Setting: 7F7F7F7FFFFFFF
A to D:
DE7AA400FD000000
Resets: 9
Tickets: 00001336
Status: TIT-2.41G-40-40-40-40-40-P
Figure 7: Test Ticket
To print the test ticket, power-on the printer while pressing and holding the Paper Feed
Button for approximately 3 seconds. A test ticket similar to above will be printed
approximately 5 seconds after. Press the paper feed button once more and the ticket
will feed. Pressing the button again will result in blank tickets.
101049
Sept. 21, 2005
8
