background image

FITTING THE OVEN INTO THE KITCHEN UNIT

Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into an

upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the frame.

To locate the fixing holes,open the oven door and look inside.To allow adequate ventilation, the

measurements and distances adhered to when fixing the oven.

IMPORTANT

If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit that

are next to the oven must be made of a heat resistant material. Ensure that the glues of units that are

made of veneered wood can with stand temperatures of at least 120ºC. Plastics or glues that cannot

withstand such temperatures will melt and deform the unit,once the oven has been lodged inside the

units, electrical parts must be completely insulated.This is a legal safety requirement.All guards must

be firmly fixed into place so that it is  impossibl to remove them without  using special tools. Remove

the back of the kitchen unit to ensure an adequate current of air circulates around the oven.The hob

must have a rear gap of at least 45 mm.

DECLARATION OF COMPLIANCE

When you have unpacked the oven, make sure that it has not been damaged
in any way. If you have any doubts at all, do not use it: contact a professionally
qualified person. Keep packing materials such as plastic bags, polystyrene,
or nails out of the reach of children because these are dangerous to children.

5

SAFETY HINTS

Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or

damp hands or feet.

For oven: Oven door should not be opened often during the cooking period.

The appliance must be installed by an authorized technician and put into use. The producer is not

responsible for any damage that might be caused by defective placement, and installation by

unauthorized personnel.

When the door or drawer of oven is open do not leave anything on it, you may unbalance your appliance

or break the door.

Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool down before

touching onto the points that are exposed to the heat directly.
If you will not use the appliance for a long time, it is advised to plug if off.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard.

 

Excess spillage must be removed before cleaning and shall specify which utensils can be left in the oven 

during cleaning. 

 

 

A steam cleaner is not to be used. 

Summary of Contents for 65EAE40007













Reviews: