`
Run page:
1.
There are
2 modes
on the Smart Oven
a.
Manual Mode
, select a profile and the oven goes to that
programmed temperature and controls to that temp.
b.
RUN Mode
, the oven runs either a Ramp/Step Profile
with timing OR runs for the
step time
value (if there is no
temp. change) press the RUN button for this mode of
operation. When the profile is done the buzzer will turn
ON, press the reset button to turn it off, there is a switch
on the back to disable the buzzer as well.
c.
To use for a timed cure, set the step time to that value
(Example 10 min.) then press run, the buzzer will go off
after 10 min.
TEMPS PAGE:
The TEMPS page sets the graph size.
Graph time scales
1x = 36 sec. per unit
2x = 18 sec. per unit
3x = 12 sec. per unit
4x = 9 sec. per unit
Temperature
Temp. Set
value
valuevalueval
ueTempuratur
e
Step #/Time
valuevalueval
ueTempuratur
e
Temp. Set value
valuevaluevalue
Elapsed Time/
total
% of step time
RUN button
Min/Max
temp.
Page buttons
Alarm
display
Temps
page
Profile
page
Settings
page
