Fixture Hanging:
1. Fix the clip to the position to be installed (Fig.a).
2. Fix the clip with screws (Fig.b).
3. Buckle the light bar into the mounting clip, and each light bar is equipped with 2 clips
(Fig.c).
4. Connect the reserved power line, and pay attention to keep the joint away from
water (Fig.d).
Series Combination Steps:
1. Fix the light bar to the position to be installed.
2. When the light bars are combined in series, the male and female connector shall be
butted and then the nut shall be tightened.
TECHNICAL SPECIFICATIONS
ASSEMBLY INSTRUCTIONS
LED PGF18
AC120V/208V/240V/277V
18W Each Bar
39µmol/s
Full Spectrum 6500K
48.4x1.3x1.3inch / 0.9lbs
1230x32x32mm / 0.4kgs
≧
50,000hrs
No
120°
Lifetime
Model
Light Distribution
Dimming
Input Voltage
Input Power
PPF
Spectrum
Dimension
/ Weight
The number of light bars can be combined in series according to the actual
environment needs. The maximum number of series combination is 25pcs
.
It is
recommended that you keep a mounting height of 6”-12”(15.2cm-30.4cm) above
canopy for optimal light efficiency and uniformity. Growers should regularly monitor the
temperature at the canopy level to ensure the height of the fixture is appropriate, as
canopy temperature and ambient room temperature can differ.
PLEASE READ THESE INSTRUCTIONS
FIRST BEFORE INSTALLATION
Welcome to purchase and use this new LED luminaire. We have done everything to
ensure a product of long lifespan and safe operation, but the installation and use of the
product is at the responsibility of the user. Incorrect use or installation can lead to
failure and damage to the luminaire. Damage to the luminaire or electronic circuitry as
a result of incorrect installation or use will revoke your warranty. Read this manual
carefully before installing your luminaire.
CAUTION :
T8 integrated lamp can be installed on the special lamp clip. The light bar can be
combined in series with the maximum power of 450W.
-02-
*Subject to change without notice, Tolerance ±10%.
c
a
b
d
AC120-277V
NOTE:
One input cable supports 25 light bars at Maximum, the last end needs to cover for
safe.
Input
Max.
25
light
bars
in
series
