Nanoleaf Wood Look Hexagons, Quick Start Manual

Page: 5 / 9

Important Installation Tips
To mount, apply
strong pressure
in a circular motion to the center of
the panel for
30 seconds.
The Controller and Power Supply
Unit can be connected to any panel
in your setup. Tape is
NOT suitable for textured,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).
Before mounting your panels,
clean your surface to be free of
dust, moisture and oil. Make sure you have enough PSUs for your layout.
NOTE: Each standard PSU
supports up to 42W. Use our PSU calculator online at go.nanoleaf.me
/
myelements.
1x 42W