Nanoleaf Mini Triangles, Quick Start Manual

Page: 5 / 60

Important Installation Tips
When mounting, apply strong
pressure to the center of the panel
for
30 seconds.
The Controller and Power
Supply can be connected to any
panel in your setup. Tape is NOT suitable for textured,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).
Before mounting your panels,
clean your surface to be free of
dust, moisture and oil. Make sure you have enough PSUs for your layout. NOTE: Each standard PSU
supports up to 42W and each Controller supports up to 500 panels. Use our PSU
calculator at
nanoleaf.me
/
myshapes.
1x 42W 1x 500x