Instruction manual
Filtrating half-mask BreaSAFE
®
ANTI-COVID-19 /
FFP2 is suitable for protection of respiratory organs
against particles. Minimum capture rate of solid
(average particle size 0.6 μm) or liquid (average
particle size 0.4 μm) air-borne particles is 94 %.
Filtrating half-mask BreaSAFE
®
ANTI-COVID-19
/FFP2 is intended for protection of respiratory organs
of the user against virus SARS-CoV-2 which causes
COVID-19 disease.
The maximum time of usability / lifetime of the
respirator cannot be precisely determined – this
always depends on the conditions under which the
respirator is used. The respirator must not be
immersed in water nor in any other liquid. The
respirator is intended for single use (NR marking) if
used in polluted (dusty or very dusty) environments.
The respirator is not to be cleaned.
Read the instruction manual before you
wear the respirator, make sure that the
respirator is not damaged and follow the
instructions when placing the respirator
on your face.
Do not use the respirator if:
•
harmful particles have penetrated the respirator and
contamination, foul odor or another sign of
penetration of pollutants into the respirator has
been discovered,
•
breathing resistance of the respirator has rapidly
increased.
The respirator does not protect against gases and in
air with oxygen concentration of less than 17 %. It also
must not be used for protection in environments
where composition and concentration of pollutants is
not known.
The respirator must be stored in dry
and clean environment at temperatures
of -5 to +40 C.
Sealing requirements will probably not
be met if the user has beard in the area
of the sealing line of the respirator.
Instructions for placing of the respirator
1. Wash your hands thoroughly.
2. Take the respirator and place it on your face (the respirator
has nose space and a sealing strip in its upper part).
3. Pull the fastening straps over your head.
4. Check proper sealing of the respirator: Inhale forcefully. If you
detect leakage of air between the respirator and your face,
you will achieve better sealing by:
•
moving the respirator on your face to more suitable
position
•
moving the fastening straps on your head to more
suitable position
Certified by the Occupational Safety Research Institute
(Jeruzalémská 1283/9, 110 00 Praha 1, www.vubp.cz)
in compliance with European norm EN 149:2001+A1 –
Protective aids of respiratory organs – Filtrating half-masks for
protection against particles – Requirements, testing and mark-
ing (Protection class FFP2).
EU Declaration of conformity (CE):
www.nano4fibers.com/cs/prohlaseni-o-shode-ce-ffp2
Manufacturer:
PARDAM NANO4FIBERS s.r.o.
ANTI-COVID-19
Antibacterial respirator
BreaSAFE
®
ANTI-COVID-19 / FFP2
valve-free filtrating half-mask
T:
+420 565 552 610
E:
www.nano4fibers.com
PARDAM
NANO4FIBERS s.r.o.
IČO: 25268694
DIČ: CZ25268694
Headquarters
Žižkova 2759
413 01 Roudnice n/L
Czech Republic
All about
BreaSAFE®
products:
www.nano4fibers.com/
breasafe
