USER GUIDE
5
NITROGEN GAS GENERATOR
GEN
2
MINI
1.2 Document Introduction
This manual provides factory prescribed installation and maintenance procedures for the PSA nitrogen gas generator. The
procedures illustrated in this document are only to be performed by authorized personnel. For further information regarding the
procedures outlined in this document contact the manufacturer before proceeding. Be sure to read this document carefully before
attempting to install or operate the nitrogen generator. This document should be permanently available at the nitrogen generator
installation site.
1.3 Warranty Guidelines
All products are supplied with a 2 year manufacturer’s warranty from the date of purchase when installed and maintained in
accordance with the manufacturers guidelines. Only genuine service parts should be used and no modifications made.
1.4 Packaging
All products are securely packaged in a specifically designed wooden packing box. All models are held in a horizontal position by
wooden struts. The box top cover can be removed by removing the fixing screws and lifting off in one piece.
Check immediately to establish whether damage has occurred to the external packaging and if the damage extends to the product
inside. If there is damage to a product, contact the relevant supplier immediately.
Under no circumstances must a damaged product be used in operation. Using damaged products can lead to
irreparable functional faults or cause serious physical harm.
1.5 General Safety
No modifications must be made to the product. Any modifications may reduce the operational safety of the product and invalidate
the manufacturer’s warranty. This could potentially result in damage to the product and serious personal injury.
For your own safety, when carrying out work on this product, all relevant national safety regulations must be
complied with relating to pressurized and electrical systems.
1.6 Intended use of the Product
The nitrogen generator is exclusively intended for the production of nitrogen gas from compressed air, which is free from bulk water,
oil and solid matter constituents and contaminants.
The product should be located within a building and protected from extreme conditions and weather. The nitrogen generator must
be operated only in accordance with the data on the rating plate. Any operations that do not comply with those stated on the
product rating label will render the warranty void.
This product is designed to operate at operating pressures of between 6 to 10 barg. It is not suitable for pressures in
excess of 10 barg although a higher pressure system is available upon request.
1.7 Unpacking the Product
DO NOT TILT
GENERATOR
FORWARD