UAB “ Nano sensorics”
🎯
Pakaunės g. 70, LT-47243 Kaunas
posted herein to inform yourself of any changes. Nano sensorics and Nano sensorics. All products, UAB “Nano
sensorics” names, logos, trademarks are property of UAB „Nano sensorics.
Sensor dimensions:
Important safety information
Read this manual before attempting to install the device. UAB „ Nano sensorics” will not accept
responsibility for any damage or injury resulting from not following the instructions in this manual.
The sensor is for indoor use;
Do not disassemble, crush, puncture, short internal circuits;
Remove batteries if the sensor is not used, discharged battery has to be removed from the battery sensor,
in this case left batteries might leak and damage the sensor;
Keep the battery or device dry and away from water or any liquid as it may cause a short circuit;
Replace batteries only with the same or equivalent type recommended by the manufacturer;
Discard used batteries according to the manufacturer’s instructions;
Do not bend, deform, shred, microwave, paint the sensors, or other hardware;
Do not insert external material into any opening on the sensors;
Disassembling or puncturing the battery (whether integrated or removable) can cause an explosion or fire;
Do not dry the sensors or battery with an external heat source such as a microwave oven or hairdryer;
Observe proper precautions when handling batteries. Batteries may leak or explode if improperly handled;
The sensor is not applied as a metrological, commercial accounting purposes and UAB „Nano sensorics“
will not be held liable for any damage which may result from inaccurate readings;
Do not use any detergent or alcohol to clean the device;
Clean gently with softly moisture cloth.
H: 25,5 mm
W: 86 mm
L: 86 mm
