3.OPERATION INSTRUCTION
2. SPOT CLEANING
6
3.3 CLEANING MODE SELECTION
Press “SPOT” button on remote controller, this mode is usually used to clean floors
where dirt is more concentrated. It will clean the area within 1m
2
and clean by spiral
mode automatic operate in around 2-3 minutes.
..........................................................
...............................................
Room A
Room B
Room D -- next step
Room C --- Cleaning
1. AUTO MODE (SMART CLEAN)
Press” Auto” on remote or “Smart Clean” on Apps. After cleaning task started, combined along with
Gyro- SLAM technology to collect the room envrionment for analysis and calculate,
Path planned, step by step, orderly and efficiently to clean the floors in high coverage. After finish
the cleaning, the unit returnsback to origin or docking station for charging.
*
*
The Robot plans path automatically when working, if being moved, it will be rebuild the plan path
and clean again. Please DO NOT move the Robot randomly to ensure high efficiently cleaning.
After cleaning task started, the robot will stop a while to search in place and build clean path,
depends on the room’s complexity .
Attention:
3. AUTO MOP
Press “MOP” on Apps or remote to start mopping. Assembly the mop pad or mechanical water
tank onto the unit before using this mode. Under mop mode, the vacuum cleaning mode will stop
working (no suction power) and the mop route are the same as smart cleaning routes.
