Nanni Z4.205, Operator'S Manual

Page: 33 / 98

33
OIL PRESSURE INDICATOR
This indicator does not show the engine oil level. This
indicator shows the oil pressure in bar and psi units.
If the oil pressure in the lubrication system is too low, the
acoustic alarm sounds and the relevant lamp comes ON.
If this alarm comes ON while operating the engine, stop
the engine, exept in extreme emergencies. Check the oil
level and the oil filter condition.
To operate an engine when oil pressure is too low,
can lead to a severe engine damage. Do not operate
the engine if the problem persist and contact a Nanni
representative as soon as possible.
COOLANT TEMPERATURE INDICATOR
Indicates the coolant temperature. If the temperature
is too high, the acoustic alarm sounds and the
corresponding alarm comes ON.
If this alarm comes ON while operating the engine, stop
the engine, exept in extreme emergencies. Wait for the
engine to cool down. Check the coolant level, the belt
condition, the raw water filter, and if the sea cock is open.
To operate an engine when temperature is too high
can lead to a severe engine damage. Do not operate
the engine if the problem persist and contact a Nanni
representative as soon as possible.
DANGER !
Never open the coolant filler cap or any plug of the
cooling system when the engine is warm. Steam or hot
fluid can spray out.
FUEL LEVEL INDICATOR
Displays the fuel level remaining in the fuel tank.
WATER LEVEL INDICATOR
Displays the water level remaining in the water tank for
amenities (when equiped).
TRIM INDICATOR
This device displays the Stern drive tilt level (when
equiped aboard) and incorporate three sectors. Be
fully aware that modifying the boat trim will affect
performance and behavior of the ship when cruising.
S05 INSTRUMENTS