49
Safety Precautions
1. Please open the package to check for possible damage. If damaged, do not use. Please contact your distributor or the manufacturer as soon as possible.
2. Please do not use power cable which are faulty or have insulation damage. Please be careful when unplugging and do not drag the power cable.
3. Before installation, please make sure the power supply voltage is correct and compatible with that specified on fixture.
4. Please turn off the power when fixture is not in use or being cleaned.
5. Please operate the fixture safely. Keep fixture away from children.
Notice
1. When the fixture is turned on, do not look directly at the emitter.
2. Please do not leave flammable or explosive articles within 0.5m of the fixture.
3. Weather resistance lamps refers to rainproof or anti-spraying, NOT submersible or underwater use. Please do not submerse the lamp in water. If you find damage on
the lamp or cable, please do not put the lamp and cable close to or contact with water.
4. Avoid placing lamps near flammable and volatile substances, such as alcohol or gasoline.
5. When cleaning the fixture, please use soft cloth with neutral detergent to wipe off dirt. Please do not use abrasives or strong detergent.
6. As accessories such as lenses and softboxes are heavy, please hold the handle securely when detaching or adjusting beam directions.
7. During use, do not cover, restrict or obstruct ventilation holes, so as not to affect the heat dissipation and cause damage to the fixture. Please take care when using
the lamp for long periods, as the surface temperature can be high.
8. Please do not disassemble the fixture or attempt to carry out repairs. Any required maintenance shiould be carried out by suitably qualified professionals, operating
in strict compliance with the instructions described in this manual.
General Fault Detection and Diagnosis
1. Please check that the power supply, cable and outlet are properly connected and that the cable
is not faulty or loose.
2. Please check wether the voltage value is within the specified parameters.
Fault Detection
Diagnosis
The light won't boot up properly
The fixture can be operated manually,
but DMX control is not working.
LCD display is on, but light cannot be operated.
The fan doesn't work
1. Please check whether the DMX original address setting of the fixture is correct.
2. Please check that the XLR signal cable is connected correctly and that it is not faulty or damaged.
Please check if the LCD display shows " ".
Press and hold the "LOCK" key for 2s to release the LOCK.
1. Please check if the fan is OFF
2. lf the screen dispays "Fan abnormal", please contact place of purchase.
The signal reception distance of 2.4 and
Bluetooth is less than 5 meters.
Check whether the LUMENRADIO is in TRANSMITTER MODE, if it is, please disconnect the
LUMENRADIO and set it in RECEIVER MODE.
