5
1. Please make sure that the power switch on the fixture is in the "off" position, then turn on the power. When turned
on, the dispaly will show the address code of the fixture, that means the power is active.
2. When setting the brightness, rotate the dimmer knob in a clockwise rotation to increase brightness and
counterclockwise to decrease brightness. The display will show the data of the brightness range from L.000···L.100.
4
.
Lighting umbrella accessory installation and removal diagram.
When installing an umbrella, insert the umbrella
handle into the umbrella hole, and lock the
umbrella handle by tightening the positioning
screw A.
Note: Lighting umbrellas are sold separately.
When removing the umbrella, loosen the positioning
screw to release the umbrella handle then remove it.
Operating Instructions
5. 2.4G Wireless Remote Control
The P series LED spot light is designed to work with a 2.4G remote controller or Nanguang WIFI-APP via WIFI transfer
device to control the light remotely.
NOTE: 2.4G remote controller or WIFI transfer device should be bought additionally. (See separate instructions for
remote controller or WIFI transfer device.)
