14
2. DMX Remote Control
①
Connect the fixture to the DMX/RDM consoles via DMX cable as shown below:
DMX IN
DMX OUT
1 GND
2 DATA-
3 DATA+
NC
NC
NC
NC
GND 1
DATA- 2
DATA+ 3
·
5-pin shielded cable with a diameter not less than 0.3mm must be used for connection between light fixture and
DMX/RDM console, or between light fixture and light fixture. XLR plug/socket and the cable should be connected
as shown above.
·
Pin1, Pin2, Pin3 for connecting DMX signal. Pin4, Pin5 has no connection.
▲NOTE: When connecting DMX, make sure the internal pin is not in contact with the inner case. The fixture can
match the DMX512 (1990) control signal.
·
5-pin and 3-pin XLR plug/socket conversion, the fixture comes with 5-pin XLR plug/socket. lf a 3-pin XLR plug is
used, please follow the instruction below.
5PIN
Pin 1:GND(SCREEN)
Pin 2:Signal(-)
Pin 3:)
Pin 4:N/C
Pin 5:N/C
3PIN
Pin 1:GND(SCREEN)
Pin 2:Signal(-)
Pin 3:)
