ZG-7600H-P User Manual
Chapter 7 Typical Applications
Page 27
Chapter 7 Typical Applications
Wireless Coverage
In the AP mode, it can be set as wireless coverage spot.
Figure 24 Wireless Coverage Application
STA-A/B/C connect AP by SSID, and then they can access PC in Ethernet and internet.
Do steps as following:
1. Set Operation Mode as AP mode in Wireless Settings page. If you want to be compatibility
with 802.11b device, you should set Wireless Mode as Auto.
2. Open Security Profile page, you could enable profile 1~8 and 802.1Q VLAN
3. Select a profile to edit, and set basic parameters as SSID, Security, etc. If you want to use
802.1x, you should set Radius.
4. STA use the same authentication to connect with AP, and then STA could access Internet,
mobile office freely.
Wireless Bridge
The wireless bridge between two places is one application condition, here we will introduce you
how to build such network quickly.