53
Functions Operations
2. Rotate the channel selector on the base transceiver to
channel 8, then hold and Press “Radio/Monitor/Re”
key to power on, (3 seconds later) until the orange light
(red light and yellow light flash simultaneously) flashes which
indicates the base transceiver is in cloning state, then release
the button.
3. When the orange light on the base transceiver flashes,
press the PTT key, the red light on base transceiver flashes,
and the yellow light on subsidiary transceiver flashes, which
indicates the base transceiver is in cloning state. The mutual
clone is successful when the light on base transceiver flashes
orange again.
4. If indicator lights of both two transceivers flashes abnormally
in the process of data transmit, it means replication fail. In
that case, please check and make sure the transmission line
is well connected. And please press the PTT button again to
resume cloning when the indicator light of the base
transceiver shines orange.
5. If need to clone with more than one transceiver, please
turn off the subsidiary device after cloning finished and
then pull out the transmission cable. And then clone to
next transceiver following steps b above.
Please reboot the transceiver to make it work properly
after cloning.
Professional Handheld FM Transceiver
