© by N&W GLOBAL VENDING S.p.A.
11
05-2008 3235-00
Wash all the components by using detergents.
-
make sure that all visible residuals and films are
mechanically removed. If necessary, use a brush
sanitize by making use of sanitizing agents.
dip the components into a container of sanitizing solu-
-
tion you have prepared before for about 20 min
;
reassemble the collection boxes and the water funnels;
-
reassemble the powder deposit drawers and the pow-
-
der funnels after having carefully dried them.
after having mounted the parts, it is anyway nec-
-
essary to act as follows:
pour some drops of the sanitizing solution into the
-
mixer;
rinse the parts in question abundantly to remove any
-
residual of the solution you have used. Use the mixer
washing function when the door is closed.
dISaSSEmbLINg aNd cLEaNINg tHE
mILKEr
the device intended to dispense hot milk (
milker
) shall
be carefully cleaned and sanitized at the time of the
installation of the machine and at least once a week or
more frequently, according to the use of the machine and
the type of milk in use in order to guarantee the compli-
ance of dispensed products with sanitary rules.
the parts to be cleaned are listed here below:
milker intended to dispense milk, to be disassembled in
-
all its parts
;
Fig. 12
Milker
1-
Dividing nozzles ( milk)
2-
Milker components
3-
Nozzle telescopic cover
4-
Brush
5-
Nozzle support
6-
Milk suction tube
7-
Flow rate regulator
8-
Dividing nozzle cover
9-
Dividing nozzle body
10-
Milk container
11-
Tube disconnection rubber-holder
12-
Fig. 11
Knurls for fastening the telescopic cover
1-
Nozzle support
2-
Dividing nozzle
3-
Brush for cleaning tubes
4-
Dispensing nozzles
5-
Tubes for dispensing instant products
6-
Funnel fastening ring nut
7-
Mixer impeller
8-
Water funnel
9-
Powder deposit drawer
10-
Product funnel
11-
Product collection box
12-
Summary of Contents for Kobalto
Page 2: ......
Page 65: ...by N W GLOBAL VENDING SpA NOTE...
Page 70: ...by N W GLOBAL VENDING SpA NOTE...
Page 72: ......
