Page
3. PRECAUTIONS
3-1 Cautions When Installing.
This game is designed for indoor use only. The game must not be installed
outdoors or
under the following conditions:-
a.
In areas directly exposed to sunlight, high humidity, direct water contact,
dust, high heat or extreme cold.
b.
In locations that would present an obstacle in the case of an emergency,
i.e.. near fire equipment or emergency exits.
c.
On an unstable surface or subject to floor vibration.
3-2 Caution when Handling.
a.
AC power must always be turned OFF, and the game disconnected, before
replacing any parts or connecting/disconnecting connectors.
b.
When unplugging the game from an electrical outlet, always grasp the
plug, not the mains lead.
c.
The machine must be earthed with a securely connected earthed plug.
d.
Care must be taken at all times to avoid electric shock when inspecting or
adjusting the game.
e.
Adjustment is required whenever the game PCB board, ROM, Steering
Assy, AB pedal Assy or control are replaced. (See 5-4 "Adjusting the Game
After Replacing Parts" on page 10)
3-3 When Transporting.
a.
Do not subject the game to physical shock when transporting or moving it.
b.
Always return the levellers to the UP position before moving the machine.
c.
Take care not to rope any moulded (plastic) parts when transporting.
d.
Always separate the seat assemblies from the cabinet before moving or
transporting.
3
Summary of Contents for Ridge Racer 2
Page 1: ...2 Operators Manual RIDGE RACER Part No 90500075...
Page 5: ...Page 2 MAJOR COMPONENTS 2...
Page 21: ...Page 9 SCHEMATIC...
Page 22: ...Page...