n a m c o
RAVE RACER’”
RIDGE RACER
3.5
Power-Up and Initialization
The following procedure should always be performed at the time of initial power-up, or
when any of these components have been removed or replaced:
l
Game
. R O M S
Steering system potentiometers
l
Pedal assembly potentiometers
1.
System initialization is performed as follows:
a .
Open the coin door to gain access to the Service Panel.
b.
Center the steering wheel and remove hands/feet from the controls.
C.
While pressing the SERVICE button, toggle the TEST switch ON.
d.
The ADJUSTMENT screen will appear as shown in Figure 2.
ADJUSTMENT
H A N D L E
G A S
B R A K E
Figure 2: Adjustment (Initialization) Screen
e .
Controls are properly biased when values are as close to ‘0000’ as
possible.
f .
Release the SERVICE button and toggle the TEST switch OFF.
5