Page 58
7-6 Removing the Gun Cover
1.
Remove the gun slides (L) and (R).
2.
Place the gun (L) face down, and remove the 4off button screws (M4x10),
1off button screw (M4x25), 4off hex cap nuts (M4), and 1off cap screw
(M3x10). Remove the gun cover (R) taking care that the lens does not fall
out.
3.
Reassemble in reverse order. (
Ensure that the flat face of the lens is
facing the back of the gun).
4.
Re-Initialize the Gun Assembly.
Cap screw (M3 x 10)
Gun casing (L)
Gun casing (R)
Button screw
(M4 x 25)
Button screws (M4 x 10)
Button screw (M4 x 10)
Lens
Hexagon cap nuts (M4)
Note direction of lens
(Convex surface faces the muzzle.)
