background image

OTHER COMPONENTS

56

OTHER COMPONENTS

31  Lights

31.1 

General information

Bikes must be fitted with the following lighting components for use on public roads in 

Germany:

 

-

Head lamp

 

-

Side reflectors and reflective strips

 

-

Tail lamp

 

-

White front reflector

 

-

Reflectors on the pedals

 

-

Red rear reflector

1

2

2

4

3

1

Head lamp/Front reflector

2

Side reflector

3

Reflector, pedals

4

Tail lamp/Rear reflector

Fig. 15: 

 Lighting components on the bike

•  Only ride the bike on public roads if all lighting components meet national and regional 

requirements.

•  Familiarise yourself with national laws and regulations.
•  Have any faulty lights replaced by your specialist dealer.

Depending on the bike model, head lamps and tail lamps are operated with a dynamo or 

separate battery or rechargeable battery in the corresponding lighting component.

31.2 

Mounting points

Depending on the bike model, head lamps and tail lamps are fitted on one of the following 

mounting points:

Head lamp

Tail lamp

 

-

On the handlebar

 

-

On the seat post

 

-

On the fork

 

-

On the seat stay

Summary of Contents for HILL BILL 20" 2022





































































Reviews: