49
SADDLE
28.1
Adjusting the saddle height
Quick-release clamp
1
1
Quick-release clamp
Fig. 10:
Adjusting the saddle height (quick-release clamp)
1. Swivel the quick-release lever outwards.
2. Adjust the saddle to the required height.
-
When doing this, observe the minimum insertion depth of the seat post.
3. Align the saddle in a straight line with the frame once you have adjusted it to the correct
height.
4. To secure in the adjusted position, swivel the quick-release lever inwards until it is flush
with the seat tube.
-
If it is not possible to swivel the quick-release lever in as far as the seat tube, you
can reduce the initial tension by turning the adjusting screw in an anti-clockwise
direction.
-
Then swivel the quick-release lever in again until it is flush with the seat tube in order
to close the seat post clamp.
5. Check if you can rotate the saddle.
-
If you can rotate the saddle, increase the initial tension of the quick-release by turning
the adjusting screw in a clockwise direction.
Summary of Contents for HILL BILL 20" 2022
Page 68: ......
