A3LA-R User Guide Version A
Document Number: 451-93156-001A
80 of 158
Test Command:
+WFRNG=?
List the supported parameter settings. The response is in the form:
+WFRNG: (supported <frng>s)
B.82 +WTM
–
IRLP
T
EST
M
ODE
Set Command:
+WTM=<tm>
Select DCE mode of operation.
<tm> can take the following values:
0
IRLP test mode off (default)
1
IRLP test mode on
Read Command:
+WTM?
Query the current parameter setting. The response is in the form:
+WTM: <tm>
Test Command:
+WTM=?
List the supported parameter settings. The response is in the form:
+WTM: (supported <tm>s)
B.83 +WDLDM
–
IRLP
D
YNAMIC
L
INK
D
ELAY
M
EASUREMENT
Set Command:
+WDLDM=[<dldm>[,<mi>[,<dtl>]]]
Set the DCE dynamic link delay measurement parameters.
<dldm> can take the following values:
0
measurement off (default)
1
measurement on
<mi> denotes the measurement interval and can take the following values:
1-255 (in 1000-ms unit). Default is 15 for 15000 ms.
<dtl> denotes the delay tolerance in the link delay difference and can take the
following values:
1-100 (in 1% unit). Default is 10%.
Read Command:
+WDLDM?
Query the current parameter settings. The response is in the form:
