Let’s start assembling your NAKTO Camel ebike!
(Please read this entire assembly manual before assembly as it will save
you a lot of time!)
Step One: Unpack the ebike.
1.Pull the frame and all parts (charger, seat, tool kit, keys & spare fuse,
nut caps, manual and pedals) out of cardboard box. Separate bike from
foam padding. Cut off all zip ties with scissors while being extra careful
as not to damage the paint or cut any wires or cables.
Notice:
The spare
is not used for assembly. Keep it in a safe place that it will be used for the
replacement if the original fuse were damaged.
Ensure all the following pieces are included with the Nakto Camel.
Tools included:
S
crewdriver, Phillips/Slotted 2 in 1
Double open-end wrench, 13mm/15mm
Allen wrench, 5mm
Allen wrench, 6mm
Tools needed:
Scissor
Bike pump
Assembly Instructions: Camel
Summary of Contents for Camel
Page 1: ...Camel...
Page 2: ...Fully Assembled Camel FW Camel FB and Camel MB CAMEAL FW CAMEAL FB CAMEAL MB...
Page 14: ......
