GB
Storing/
Disposal
/
Malfunctions and troubleshooting
6
After every use
Cleaning the appliance externally
Rinse with clean water. Remove stubborn contamination with a brush and detergent.
Submerge the pump in a container with clean water and switch on for a short time to rinse the
inside of the pump.
Cleaning the suction area
– Clean all accessible insides of the casing. Remove fibres which have wound around the rotor
shaft by opening the pressure connection. Remove stubborn contamination with a brush and
detergent.
Storing
If there is a risk of frost, dismantle the appliance and accessories, clean them and store in a place
protected from frost.
Disposal
Disposing of the appliance
Products which are labelled with the adjacent symbol must not be disposed of in house-
hold rubbish. You must dispose of such old electrical and electronic equipment sepa-
rately.
Please check with your local authority about the possibilities for correct disposal.
Through separate disposal you send old equipment for recycling or for other forms of re-use. You
will thus help to avoid in some cases that damaging material gets into the environment.
Disposing of the packaging
The packaging consists of cardboard and correspondingly marked plastics that can be recycled.
– Make these materials available for recycling.
Malfunctions and troubleshooting
In the event of a malfunction…
What?
How?
Clean the appliance.
Note:
Before using the pump again, first “soak” it so that any possible dirt residues do not
block the appliance.
Attention!
Risk of damage to the appliance!
Frost destroys the appliance and accessories, as these always contain water!
Danger!
Danger of physical injury and death!
Improperly conducted repairs may prevent your appliance from working safely. Such
repairs will endanger you and your surroundings.
Summary of Contents for SP7580
Page 1: ...SP7580...
