www.NakayamaTools.com
37
8. If meet any problems, press the engine switch, the machine will stop running. If need stop
cutting head working, release the throttle lever.
9. If the
machine is hot
,
the throttle level can
be adjusted to ON position
directly when re
start the machine.
Note:
Do not start the motor in tall grass
Note:
While mowing, lay the connection cable safely on footpaths and on
areas which have
already been mowed
.
When the engine
has been switched off, the cutter continues running
for several seconds
therefore do not close to cutting head of brush cutter until the cutter has come to a
standstill!
MAINTENANCE AND CARE
Before performing any maintenance or cleaning work, Always turn off the engine.
1. Do not spray the unit with water. Ingress of water may
damage the engine and electrical
connection.
2. Clean the unit with a cloth, hand brush, etc.
Maintenance schedule
12 hours of use
24hours of use
36hours of use
Air filter
clean
clean
replace
Spark plug
check
clean
replace
Expert inspection is required:
a
)
If the brush cutter
strikes an object.
b) If the motor stops suddenly
c) If the blade is bent (do not align!)
d
) If the gears are damaged.
Replacing and resharpening the cutting blade at the end of the mowing season always
resharpen the cutting blade
or, if required, replace the
cutting
blade with a new one. Always
Summary of Contents for PB7200
Page 1: ...www NakayamaTools com Οδηγίες χρήσης για θαμνοκοπτικό PB7200 ...
Page 12: ...www NakayamaTools com 12 Μονός ιμάντας ...
Page 25: ...www NakayamaTools com 25 Step 3 Lock the bracket turn tightly 5 Assemble the safe guard ...
Page 32: ...www NakayamaTools com 32 B Double belt C double belt ...
