Nakayama PB4500, Manual, Page: 22 / 28

www.NakayamaTools.com
7. If use Nylon cutter, before cutting, need bump to feed line on hardness area
8. If meet any problems, press the engine switch, the machine will stop running. If need
stop cutting head working, release the throttle lever.
9. If the machine is hot, the throttle level can be adjusted to ON position directly when re
start the machine.
Note: Do not start the motor in tall grass
Note: While mowing, lay the connection cable safely on footpaths and on areas which
have already been mown.
When the engine has been switched off, the cutter continues running for several seconds
therefore do not close to cutting head of brush cutter until the cutter has come to a
standstill!
Maintenance and care
Before performing any maintenance or cleaning work, Always turn off the engine.
1. Do not spray the unit with water. Ingress of water may damage the engine and electrical
co nnection.
2. Clean the unit with a cloth, hand brush, etc.
Maintenance schedule
12 hours of use 24hours of use 36hours of use
Air filter clean clean replace
Spark plug check clean replace