Nakayama GS9500, Owner'S Manual, Page: 13 / 18

13
WWW
.N
AKAYAMA
T
OOLS
.
COM
E. If you spill gasoline, do not attempt to start the engine. Move the machine away from the area of the spill and avoid
creating any source of ignition until the gas vapors have dissipated. Wipe up any spilled fuel to prevent a fire hazard and
prope rly dispose of the waste.
F. Allow the engine to cool completely before storing in any enclosure. Never store a machine that has gas in the tank, or a
fuel container, near an open flame or spark such as a water heater, space heater, clothes dryer or furnace.
G. Never make adjustments or repairs with the engine running. Shut down the engine, disconnect the spark plug wire,
keeping it away from the spark plug to prevent accidental starting, wait 5 minutes before making adjustments or repairs.
H. Never tamper with the engine’s governor setting. The governor controls the maximum safe operation speed and protects
the engine. Over - speeding the engine is dangerous and will cause damage to the engine and to the other moving parts of
the machine. If required, see your authorized dealer for engine governor adjustments.
I. Keep combustible substances away from the engine when it is hot.
J. Never cover the machine while the muffler is still hot.
K. Do not operate the engine with the air cleaner or the carburetor air intake cover removed. Removal of such parts could
create a fire hazard. Do not use flammable solutions to clean the air filter.
L. The muffler and engine become very hot and can cause a severe burn; do not touch.
General Safety
Warning!
Operating this Wood Chipper safely is necessary to prevent or minimize the risk of death or serious injury. Unsafe operation
can create a number of hazards for you. Always take the following precautions when operating:
A. Your Wood Chipper is a powerful tool, not a plaything. Exercise extreme caution at all times. The machine is designed to
Chip Woods. Do not use it for any other purpose.
B. Know how to stop the Wood Chipper quickly.
C. Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to avoid slipping or falling.
D. See manufacturer’s instructions for proper operation and installation of accessories.
E. Never use the machine without ensuring that all guards and shields are in place.
F. Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the Wood Chipper. This
includes all shields and guards. Modifications to your machine could cause personal injuries and property damage and will
invalid your warranty.
G. If the machine start to make an unusual noise or vibrate, shut down the engine, disconnect the spark plug wire, keeping it
away from the spark plug to prevent accidental starting, wait 5 minutes for engine to cool down, then inspect for damage.
Vibration is generally a warning of trouble. Check damaged parts and clean, repair and/or replace as necessary.
H. Never tamper with safety devices. Check their proper operation regularly.
I. Before performing any maintenance or inspection procedure, shut down the engine, disconnect the spark plug wire
keeping it away from the spark plug to prevent accidental starting, wait 5 minutes for machine to cool down.
J. Never allow people who are unfamiliar with these instructions to use the Wood Chipper. Allow only responsible individuals
who are familiar with these rules of safe operation to use your machine.
K. Never overload or attempt to chip woods beyond the manufacturer’s recommendation. It could result in personal injury or
damage to the machine.
L. While using, don't hurry or take things for granted. When in doubt about the equipment or your surroundings stop the
machine and take time to look things over.
M. Never operate the machine when under the influence of alcohol, drugs, or medication.
N. Use the machine only in daylight.
O. Stay alert for hidden hazards or traffic.
P. Keep all nuts and bolts tight and keep the equipment in good operating condition.
A Note to All Users
List of warnings and cautions cannot be all - inclusive. If situations occur that are not covered by this manual, the operator
must apply common sense and operate this WOOD CHIPPER in a safe manner. Contact the dealers for assistance in your area.
Familiar with the Wood Chipper
It may be helpful to familiarize yourself with the controls and features of the Wood Chipper. If you have any question, pleas e
contact the dealers in your area.