Nakayama EB3500, Owner'S Manual, Page: 17 / 24

17
WWW
.N
AKAYAMA
T
OOLS
.
COM
replaced or repaired at an authorized service center. Check any
other condition that may affect the operation of the power tool.
A guard or any other part of the power tool that is damaged should
be properly repaired or replaced by an authorized service center
unless otherwise indicated in this instruction manual.
Any switch that does not operate correctly must be replaced by an
authorized service center.
Do not use the power tool if the ON/OFF switch does not turn the
power tool ON and OFF.
Warning
Do not attempt to modify the power tool in any way. The use of any
attachment or accessory over than those recommended in this
instruction manual could result in damaged to the power tool and
injury to the operator.
Have your power tool repaired by a qualified person.
This electric power tool complies with national and international
standards and safety requirements. Repairs should only be carried
out by qualified persons and using original spare parts. Failure to
do so may result in considerable danger to the user.
Fire Precautions
When using the certain power tools inside your house or workshop
general fire precautions should be observed. As a precaution it is
recommended that an expert is consulted on obtaining and using a
suitable fire extinguisher.
SPECIFIC SAFETY INSTRUCTIONS
VAC-BLOWER
WARNING!
Never allow children or people who have not read and understood
these instructions to use the Vac-Blower. Do not use the Vac-
Blower for any purpose other than those described in these
instructions.
Study the warning sticks on the machine, and replace any
damaged or illegible warning sticks.
Read these instructions carefully. Find out what the controls do
and learn how to use the machine correctly and safely.
The user is responsible for any accidents that happen to other
people or their property.
Preparation
Always wear suitable clothing, gloves and stout shoes. The use of
approved safety goggles is recommended.
Before using your Vac-Blower always visually inspect it to see that
any parts are not worn or damaged. Replace worn or damaged
parts. Always inspect the insulation on the power cord and any
extension cable to be used, for cuts, and abrasions and the