7
WWW
.N
AKAYAMA
T
OOLS
.
COM
CAUTION!
Never attempt to mix fuel in the machine fuel tank! Always mix all fuels in a clean approved container!
Some gasoline contain alcohol as an oxygenated! Oxygenated fuels may cause increased engine operating temperatures!
Under certain conditions, alcohol-based fuels may also reduce the lubricating qualities of some mixing oils! Never use any
fuel containing more than 10% alcohol by volume! When an oxygenated fuel must be used fuel containing an ether-based
oxygenates such as MTBE is to be preferred over alcohol!
Whenever possible use 2-cycle oil or equivalent oil mixed at a 25:1 ratio. Be aware that generic oils and some outboard
mixing oils may note intended for use in high-performance air cooled 2-cycle engines, and should never be used in your
engine machine.
WARNING!
Danger of fire!
Never transfer or store fuels in the presence Of combustible materials! Before starting the engine, always
move the machine to a clear area at least 10-feet (3-meters) away from fuels and other combustible materials!
IMPORTANT!
Mix only enough fuel for your immediate needs! If fuel must be stored longer than 30-days, it should first be treated with a
stabilizer or equivalent product!
FILLING THE FUEL TANK
WARNING!
Danger of fire and burn injury!
•
Always use extreme care when handling fuel! Fuel is highly flammable!
•
Never operate this blower if fuel system components are damaged or are leaking!
•
Never attempt to refuel the engine while it is running!
•
Never attempt to refuel a hot engine! Always allow the blower engine to cool before fuelling!
•
Never smoke or light any fires near the blower or fuel!
•
Always transport and store fuels in an approved container!
•
Never place flammable maternal close to the engine muffler!
•
Never operate the blower without a properly functioning muffler and spark arrestor installed!
•
Never operate the blower unless it is properly assembled and in good working condition!
1. Place the machine on the ground or on a sturdy work surface, and wipe any debris from around the fuel cap.
2. Remove the fuel cap.
3. Fill the tank with clean, fresh fuel.
4. Replace the cap, and wide away any spilled fuel before starting the machine.
Remove the fuel cap
Summary of Contents for BL3000
