EN
WWW.NAKAYAMATOOLS.COM
3
Description of main parts
Gear case
Handle
Throttle lever
Drill
Engine
Grip
Assembly instructions
Gear case
Bolt x3
Engine
Clutch shoe
Stud x1
*
1. Gear case-to-engine (Fig. 1)
(1) Lay the engine on the ground
with the clutch shoe facing up-
wards. Screw the stud into the *
marked hole (1 spot only).
(2) Set the gear case on the engine
and loosely tighten the stud and
nut.
(3) Screw the other 3 bolts into the
remaining 3 holes, then tighten all 4
bolts securely and evenly.
2. Throttle wire engine-to-gear case connection (Fig.2)
(1) Work open the connector case using a slotted screwdriver at point A, and
remove the case.
(2) Connect the throttle wire end on the engine side to its counterpart on the gear
case side.
(3) Reattach the connector case.
(4) Close the case securely.
Fig. 1
Fig. 2
Connector case
Connector case
Connector case
Throttle wire (gear case side)
Throttle wire (engine side)
Close in this direction
A
Summary of Contents for 043256
Page 1: ...en el WWW NAKAYAMATOOLS COM ART NO PD5230 043256 ...
Page 14: ......
