EN
WWW.NAKAYAMATOOLS.COM
12
Troubleshooting
Case 1. Starting failure
Make sure the icing prevention system is not working.
Case 2. Lack of power / Poor acceleration / Rough idling.
Case 3. Oil does not come out
When your unit seems to need further service ,please consult with our service shop in your area .
Check fuel for water or substandard mixture.
Check fuel for water or substandard mixture.
Check oil for substandard quality.
Check for engine flooding.
Check air filter and fuel filter for clogging.
Check oil passage and ports for clogging
Check the spark.
Check carburettor for inadequate adjustment.
Replace with proper fuel.
Replace with proper fuel.
Replace.
Remove and dry the spark plug.
Then pull the starter again with no choke.
Clean.
Clean.
Replace with a new plug.
Replace speed needles.
Model:
PC4100 PC4610
PC5610
Displacement:
39,6cc
45,6cc
54,5cc
Power:
2hp
2.4hp
3.5hp
Bar Length:
40cm
45cm
50cm
Chain:
3/8 LP,
1,3mm
0,325''
1,3mm
0,325''
1,5mm
* The manufacturer reserves the right to make minor changes to product design and technical specifications without
prior notice unless these changes significantly affect the performance and safety of the products. The parts described /
illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's
product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replace-
ment work, including maintenance and special adjustments, must only be carried out by technicians of the authorized
service department of the manufacturer.
Technical Data
