EN
WWW.NAKAYAMATOOLS.COM
10
Troubleshooting
Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem
can be solved quickly.
WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an au-
thorised service centre or a similarly qualified specialist if you cannot solve the problem yourself!
Problem
Possible cause
Solution
1. Product does not start
1.1. Not connected to power supply
1.2. Power cord or plug is defective
1.3. Other electrical defect to the product
1.1. Connect to power supply
1.2. Check by a specialist electrician
1.3. Check by a specialist electrician
2. Product does not reach full power
2.1. Power source (e.g. generator) has too low
voltage
2.2. Air vents are blocked
2.1. Connect to another power source
2.2. Clean the air vents
3. Unsatisfactory result
3.1. Tines are dull/damaged
3.2. Tines not suitable for ground material
3.1. Replace with new one
3.2. Use product only on suitable ground
4. Excessive vibration or noise
4.1. Tines are dull/damaged
4.2. Bolts/nuts are loose
4.1. Replace with new ones
4.2. Tighten bolts/nuts
Recycling and disposal
The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been deliv-
ered and the product is function properly. Recycle the package afterwards.
WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your
Local Authority or local store for recycling advice.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of
the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses
or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
Summary of Contents for 034346
Page 1: ...en el WWW NAKAYAMATOOLS COM ART NO MB2100 034346...
Page 3: ...WWW NAKAYAMATOOLS COM 3 FIG 1 FIG 3 FIG 4 FIG 5 FIG 2 FIG 1...
Page 4: ...WWW NAKAYAMATOOLS COM 4 FIG 6 FIG 7 FIG 8 FIG 9 FIG 10 FIG 12 FIG 11...
Page 11: ...EL WWW NAKAYAMATOOLS COM 11 E To 8 E 1 2 3 4 5 6 7 O H K T 230V 50Hz 10 30 mA...
