EN
WWW.NAKAYAMATOOLS.COM
4
Plug
Storage
After using the sprayer for the season, store it until the next season of use as follows:
a) Drain off all fuel from the fuel tank and the carburettor.
b) Remove the spark plug and coat the interior of the cylinder with a small amount of oil. Pull the recoil starter lightly 2-3
times to spread the oil over the cylinder completely.
c) Pull the recoil starter out slightly and stop it in place where you fuel the pull starter (compression starts).
d) Clean the entire sprayer completely, cover it so it does not accumulate dirt and dust, and store it in a dry, coll location.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless
these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the man
-
ual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, includ
-
ing maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufac
-
turer.
Connecting nut
Drain cap
Start the engine at just less than high speed for 15-
20 seconds to spray out the water in the spray hose
and nozzle. When water stops coming from the
nozzle, turn off the engine at once.
Maintenance
Cleaning the air cleaner
Gasoline
Mixed Fuel
Soak in oil
Squeeze firmly
Remove the air filter cap to clean the
element
Proper State
Remove Carbon
Dry plug
Pull 2-3
Times
0.8mm
Displacement: 26cc/2stroke
Horsepower: 1hp
Tank cap: 25L
Delivery: 3-8L/min
Pressure: 15-25 Bar
Weight: 1kg
Technical Data
