Nakayama 019886, Manual

Page: 2 / 10

2
WWW
.N
AKAYAMA
T
OOLS
.
COM
EN
Introduction
Thank you for purchasing this product. Please read these instructions, and keep them for future reference.
This tool is an electric pump. It is used for pumping water and other similar water applications.
After opening the package, please ensure that the products are complete (if any).
If the products are damaged or there is something missing, please do not use it and bring it back to your dealer.
If you give this tool to another person, please give him this instruction manual.
Safety Instructions
1. All electrical sockets must be earthed.
2. No power cord should be used for transporting or fixing the equipment.
3. Don't pull the power cord on the sharp edge and don't press the power cord.
4. The power supply voltage must be the same as the voltage given on the model board.
5. To avoid hazards, all installation and replacement of components can only be carried out by authorized customer service
personnel.
6. Electrical connections can only be performed by electrical professionals, and please comply with state regulations for this.
7. The pump must be connected with a current type leakage current breaker which carry a rated leakage current of no more
than 30 MA.
8. Check the connection of the plug before running. If the wire is damaged, it must be replaced by the manufacturer, the
agent or the relevant technical personnel to avoid any danger.
9. Children are not allowed to wash or maintain equipment without supervision.
10. Liquid contamination may be caused by leakage of lubricating oil.
11. The water pump can be connected with a shock proof plug installed in accordance with the regulations.
12. Do not use pumps when there is someone in the water.
13. When cleaning and maintaining, please disconnect the water pump from the main power supply.
14. Please contact technical staff.
15. Connectors for power plugs and extension cables must be made sure that they are watertight and must not be placed in
the water. Furthermore, connectors cannot be placed on the ground. It is recommended to ensure that the outlet is at least
60 mm from the ground.
None follow of the safety tips will have the life risk brought by the current!
Danger type and source:
None follow of the safety tips will have the life risk brought by the current!
Do not repair the power cord if there is any external damage to the power cord or plug.
INSTALLATION AND COMMISSIONING
Long enough and strong ropes should be attached to the handle before the first use. When the pump is immersed into the
liquid, the rope along with a handle can be used to balance the pump.
Installation
The equipment requires an area of at least 60x60cm.
Depth of equipment immersed in technical parameters.
When installing the equipment, make sure the open will not the suction opening will not be blocked by foreign objects to
keep the equipment stable.