[Requiring Spacer]
MAKITA
GWS6-115
G12SS
G12SR3
G13SB3
GWS7-115
G13SR3
G13SE2
-2-
BOSCH
HITACHI
[ h ] Spacer
[ k ] Spacer
[ j ] Spacer
T12.6
T4.5
T9.4
T7.3
[ i ] Spacer
FIT TO GRINDER
N G
Hold
Hold the top of the Main Unit and tighten
the screws.
* Confirm NO tilt in Grinder.
* Adjust the angle of Grinder so as to make
the bottom surface flat.
* G13SB3/SE2 need [n] FOOT PLATE.
==>Refer to Page4.
BLADE INSTALLATION
Wrench
Blade
[m] Base Flange
1. Loosen Knob Bolt and open [a] Main Unit.
2. Set the proper Spacer [h-k] into the Spindle.
3. Set [m] Base Flange on the Spacer.
4. Set the Blade on [m] Base Flange.
5. Set the Wheel Nut on the Blade.
(Be care of the direction of Wheel Nut)
6. Fix the spindle and tighten the Wheel Nut.
7. Confirm NO contact between the Blade and inner
area of the Main Unit.
Spindle
Knob Bolt
WARNING
Make sure TORNADO is securely
attached, otherwise it may come loose,
causing injury.
Wheel Nut direction
BOSCH
OTHERS
[a] Main Unit
GWS8-115/GWS8-125
GWS9-125/GWS10-125
GWS11-125CI/GWS14-125CI
GWS15-125CIH(CIEH)(CITH)
9554NB
9558NB
GA4530
9565CV
O K
O K
N G
* G13SB3/SE2 need
[n] FOOT PLATE.
==>Refer to Page4.
BOSCH GWS6-115 / GWS7-115
After fitting, tighten [r] Setscrews into [d]
M-Connecter by [q] Wrench.
[q]
[r]
Do NOT over tighten [r] Set
screws or they could cause
damage or deformation to the
Grinder and Connecter.
[d]
