Eto Naoya
Managing Director
-4-
27th-Nov. 2019
GRINDING
CORNER GRINDING
1.
Turn on the Vacuum.
2.
Securely hold the Handle of the grinder.
3.
Turn on the angle grinder.
4.
Place the [a] Main Body on the material and slowly
move over the surface to be ground. (Fig.15)
Fig.15
[CAUTION]
Don't grind over the edge of the material as some
dust could escape (Fig.16)
Fig.16
N G
1.
Make sure that the angle grinder
and Vacuum are turned off.
2.
Lift the angle grinder away from the material.
3.
Open the Front Lid by pulling the Slider.
(Fig.17)
Head Office in Japan
NAKAYA CO.,LTD.
1313-92 Yanagisawa, Sanjo, Niigata, Japan
[CAUTION]
The wheel dia. must be max.180mm to
prevent the over grinding. (Fig.18)
(90mm)
max.180mm
Fig.18
Fig.17
Slider
Fig.19
Fig.20
4.
Turn on the Vacuum.
5.
Turn on the angle grinder while ensuring the handle is gripped firmly .
6.
Place [a] Main Body on the material and slowly move toward the grinding
direction along the wall. (Fig.19)
7. Turn off the angle grinder and vacuum, then close the Front Lid. (Fig.20)
Front
Lid
Vacuum
Vacuum
