Model Code
NKC-180
Suitable tool
Ø
175
～
180mm (7 inch class) / h20-30mm Diamond Grinding Cup Wheel
Weight
0.8kg (Main Unit with adaptor system)
Material
Concrete / Block.
Suitable
BOSCH
Angle Grinders
MAKITA
Milwaukee
DEWALT
Metabo
FLEX
HiKOKI (HITACHI)
L21-8 180, L21-6 230, L24-6 230, L26-6 230
GWS24-180 / H / J / JH / LV, GWS24-230 / H / J / JH / LV
GWS20-180 / H / J / JH, GWS20-230 / H / J / JH, GWS22-180 / H / J / JH / LV, GWS22-230 / H / J / JH / LV,
GA7020 / 7040 / 7050 / 7060 / 9020 / 9030 / 9040 series.
AG22-180, AG22-230, AG22-230E
DWE490 / 492 / 492S / 493 / 494, D28413 / 28490 / 28492 / 28498 / DWE4559 / DWE4579 / DWE4599
(W / WE) 22-180MVT, (W / WE / WEA / WEPB / WEPBA) 24-180MVT, W26-180MVT, (W / WE) 22-230MVT,
(W / WE / WEP / WEA / WEPB / WEPBA) 24-230MVT, (W / WE / WEA / WEPBA) 26-230MVT
G18 / 23 series.
NKC-180 Dust Extractor
INSTRUCTION MANUAL
WARNING
SPECIFICATIONS
N300253_Rev1
[c]
[d]
[e]
[ f ]
[g]
[h]
[ i ]
[k]
[q]
[n] [o]
[p]
PREPARATION
[b]
Fig.2
Fig.1
Gear Case
-1-
Fig.3
Groove
Gearbox
housing
・
DO NOT use the HURRICANE ALPHA with non-approved angle grinders. Please check against list below.
・
HURRICANE ALPHA is only for grinding concrete and block. DO NOT use for grinding steel or other materials.
・
HURRICANE ALPHA must be used with a vacuum designed and approved for concrete dust.
・
HURRICANE ALPHA is only for use with Diamond Grinding Cup. DO NOT use with abrasive grinding wheels.
・
Always check the HURRICANE ALPHA for damage, cracks, or deformation before use.
・
DO NOT use the HRRICANE ALPHA if it is cracked, damaged or bent as this could lead to injury.
・
Be sure to wear protective goggles, dust mask, protective gloves and foot wear, earplugs and other protective equipment when working.
・
Keep the HURRICANE ALPHA away from gasoline, solvents, and paraffin.
・
Ensure the work piece is securely clamped before working.
[a] Main Body / [b] Metabo Ring / [c] Adaptor / [d] Centering Holder / [e] Flange Bolt / [f] Base Flange
[g] Spacer T3.4 / [h] Spacer T6.0 / [ i ] Spacer T7.5 / [k] Spacer T9.4 / [m] Spacer T10.6
[n] Bolt (L60) / [o] Bolt (L45) / [p] Hex Wrench / [q] Hose Connector
Explanation
of the pictograms.
Read the operating
instructions before use.
Wear
eye protection.
Wear
breathing protection.
Wear
ear protection.
Wear
protective gloves.
General
Warning.
OVER VIEW
[b]
[m]
Lever unit &
O-ring
Hook
[c]
WX22-230
W24-230
only.
[a]
※
Based on
2018 models.
Metabo / Dewalt DWE4579 type
1.
[Metabo / Dewalt DWE4579 type]
Remove the Lever unit and O-ring
(WX22-230 and W24-230 only) , then
set [b] Mount Ring on the Gear Case.
(Fig.2)
2.
Set [c] Adaptor around the Gear
Case with the Hooks securely stored
into the groove at Gear Case.
(Fig.3)
