HOW TO COMPLETE THE WIRING.
★
Consult the diagram below. Be sure to connect corresponding terminals, i.e. ''+'' to ''+'' and ''-'' to ''-''. Connection
with reversed polarity will degrade the quality of production.
★
Connect the provided speaker cord to the speaker terminal while holding the lower portion of the speaker terminal.
Connect the woofers and the tweeters to the 2-way crossover network first, then connect the network
to your amplifier or car audio directly.
You can also mount the speakers into the surface of the rear tray.
Follow the steps in section “Option 1: Mount on door” to mount the speakers into the rear tray.
Option 2: Mount the woofer on rear tray
Follow steps mentioned in “Mount the woofer” section to mount tweeter.
Find a proper location to mount the tweeter. Mount the tweeter onto the car with the supplied screws.
Mount Mid-range and Tweeter
Option 1
Option 2
★
Find a proper location to mount the networks.
★
Mount the networks onto the car with the supplied screws.
MOUNT THE NETWORK
Option 2
Option 1
Amplifier
Woofer
Tweeter
