Speaker cable
(not supplied)
Amplifier
Amplifier
The subwoofer is heavy. Attach it firmly to a solid thick baffle-board.
Do not continuously use the speaker system beyond the peak power handling capacity.
Keep credit cards, watches, recorded tapes etc. with magnetic coding away from the speaker
system to prevent damage caused by the magnets in the speakers.
Clean the apparatus with soft, damp cloth. Never use substances such as alcohol, chemicals or
household cleaners on the apparatus.
Important
You can mount the subwoofer on the rear tray.
★
Set the wiring firmly on the floor of the
vehicle, taking the utmost care not to break wires
while installing.
Option 1: Mount on rear tray
Turn off the car ignition key.
★
If the power is on, the click noise generated by the connection may damage the subwoofer.
Cut out the mounting template from the packing box and paste it onto the location selected for
mounting the subwoofer.
Mark the cut-off hole and the 8 bolt holes.
Cut out the marked area and drill the bolt holes.
Installation
Connect the subwoofer to the amplifier.
★
The impedance
o
f the units are related with
how to connect. Make sure that the output
impedance of the amplifier’s speaker terminal
is relevant with connection. (Refer to “How to
complete the wiring”.)
★
Consult the diagram. Be sure to connect
corresponding terminals, i.e. “+” to “+” and “-”
to “-”. Connection with reversed polarity will
degrade the quality of reproduction.
5.
1
.
2
.
3
.
4
.
Check and identify the contents of your package:
1. Subwoofer (1); 2. Installation manual (1); 3. Screw Ø5×30(8); 4. Mounting template(1).
What’s in the box
Mount the subwoofer into the rear tray with the supplied screws.
6.
Option 2: Install in a sealed enclosure
SureSet Fuse Configurations
TM
◆
2-ohm operation
◆
8-ohm operation
TM
Note: The SureSet feature utilizes standard mini automotive ATC fuses to select between series or parallel voice-coil
operation (DVC only). The fuses also provide voice-coil protection under transient conditions such as accidental
momentary overdrive. The fuses will not protect against voice-coil failure resulting from long term high power abuse.
Single NG 112 Enclosure Design Example - Sealed
TM
In-Car Response w/Q-Tune
Enclosure Response
H=Height
W=Width
D=Depth
Gross Volume
t
TM
Q-Tune
:(HP & Q)
10.5''/ 267mm
13.0''/ 331mm
13.0''/ 331mm
3
1.0 Ft / 28.3L
Enclosure dimensions are internal and include basket displacement
This enclosure size is an example and these dimensions can be modified provided that the exact internal volume is
retained
3
/
4
-inch thick M.D.F. is recommended as a minimum
TM
tQ-Tune is a feature found on Nakamichi NGTA Amplifiers
TM
In-Car Response w/Q-Tune
Enclosure Response
Single NG 112 Enclosure Design Example - Ported
Enclosure dimensions are internal and include basket displacement
This enclosure size is an example and these dimensions can be modified provided that the exact
internal
volume
is
retained
and
that
there
is
adequate
space
behind
the
vent
(
diameter
of
port
from
the
back
and
side
walls
)
3
/
4
-inch thick M.D.F. is recommended as a minimum
*
Recommended
distance
from
sides
and
back
walls
of
enclosure
TM
tQ-Tune is a feature found on Nakamichi NGTA Amplifiers
H=Height
W=Width
D=Depth
P=Port Clearance*
Gross Volume
15.5''/ 398mm
16.5''/ 420mm
14.0''/ 356mm
3
2.0 Ft / 56.6L
Port
Diameter
Port
Length
t
TM
Q-Tune
:(HP & Q)
4.0''/ 100mm
13 0''
.
/ 330mm
4.0''/ 100mm