from 1 minute / 3 minutes / 5 minutes / Closed.
a. If 1, 3 or 5 minute option is selected, the unit will overwrite the
earliest file once the TF card is full.
b. If the Close function is selected, the files will be saved in 3 minute
intervals but once the TF card is full the earliest file will not be
overwritten and the recording will stop.
c. The video is saved in the 1 and 2 folder in the DCIM folder of the TF
Card, with 1 saving front recordings and 2 saving rear recordings.
2. Manual Recording
Pressing the unit’s power button, and then pressing the enter button,
the unit will start manual recording, showing the recorded time. To
turn off, just press and hold the power button for 2 seconds and the
unit will shut down, saving all data before doing so.
3. Collision Detection
The built in collision sensor (G-Sensor) will detect if there is a serious
impact. Once it detects a collision, the unit will automatically lock the
recording and save it with a higher priority, and a lock image will be
shown on the upper left corner of the image. The locked image and
recording will not be overwritten during the regular recording loop.
a. Locked files are recorded beginning with SOS, normal recordings
are recorded beginning with REC.
b. The collision sensor can be adjusted for sensitivity in the settings
menu.
4. Vehicle Reversing
For this function, the camera must be connected to the reverse
sensor. The unit will function as per normal, but once the car is put into
reverse, the reverse image will be displayed. The unit will go back to
normal functions once the car is out of reverse mode.
5. Motion Detect
During standby mode, any movement infront of the unit’s camera will
be recorded automatically.
9 EN
前言
1 CN
繁體中文
前言
配件清單
規格
產品尺寸
面板控制和功能
觸摸TP
安裝指南
功能简介
2 CN
2 CN
2 CN
3 CN
4 CN
5 CN
7 CN
8 CN
