Nakamichi NAM5420, User Manual

Page: 13 / 24

10 EN
1. Press [ ] on the panel to enter the homepage.
2. Click [ ] to enter the DSP setting interface.
Frequency control point: 14 segment EQ, can be
adjusted according to their preferred frequency.
U1,U2,U3 function: Custom EQ type, long press U1, U2, U3
button can save to the current setting.
Each period of equalizer of center frequency points can
be arbitrary set before 20-20 KHZ.
Audio mode: Custom, Standard, Pop, Rock, Classical, Jazz.
Each section of the equalizer Q value can be adjustable
before 0.4-12.
DSP Output Volume Interface
Drag the gain bars of each speaker to adjust the
gain value.
Silent: Support 8 channel volume independent
adjustable, channel separate mute Settings.
Inverse phase: Supports positive phase and reverse
phase settings.
DSP Output Frequency Division
Interface
Frequency division support RCA speaker line 5.1
channel and two frequency,three frequency division.
Each channel can adjust the frequency and slope
of high pass and low pass according to demand.
When setting the tweeter, the center frequency
should not be set too low, otherwise it will
damage the tweeter equipment.
DSP Audio Interface
DSP SETTINGS