Nakamichi NA85, Service Manual

Page: 20 / 23

MENU
SUB-W
DBSS
XB
A
S
S
BAND
SRC
EQ
1 2 3 4 5 6
Operation of Bluetooth Hands-Free
Press to answer / accept the call.
Press and hold to transfer the call.
■
■
Press to reject / end the call.
Getting Started
You can make or receive phone calls with Bluetooth-enabled
phones through the unit. You can also listen to music from a
Bluetooth-enabled device.
Before use the Bluetooth device, you need to pair the device to
the unit. Pairing needs only to be done once.
1 Open your mobile phone and switch bluetooth on.
1 Press and hold to enter into the [MENU] mode.
1 Press and hold to enter into the [MENU] mode.
2 Search for other bluetooth device with your device.
2 Once the [DIS-CON ] is displayed, press to activate
the manual Disconnect mode.
2 Once the [RE-CON ] is displayed, press to activate
the manual Re-connect mode.
4 Input the password “0000”
5 [Paired] will be displayed on the screen if pairing is
successful, and the paired device will connect to the car audio
system automatically.
3 Select “NAKAMICHI” in the pairing list.
Making a Call
Receiving a Call
Call Transfer
Bluetooth Audio Streaming A2DP
You can dial number through the mobile phone.
Pairing the Bluetooth devices
Disconnect the bluetooth
Re-connect the bluetooth
MENU
1 Use the Mobile Phone to dial and make an outgoing call.
1 Press on front panel to redial.
2 Press , unit will display [CALLING] , and the unit starts
dialing the number dialed last time.
2 Once completed the dialing, [CALLING] is displayed.
To redial number
1 If there is incoming call, the phone number is displayed. if the
incoming call has no phone number, [PHONE IN] is displayed.
2 Press to answer / accept the call.
3 When conversation ends, press to terminate the call.
You can transfer voice from loudspeaker to mobile phones during call.
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to the music stored on
the device through the unit. If the device also supports Audio
Video Remote Control Profile (AVRCP) profile, you can use the
control on the unit or its remote control to play music stored on
the device.
During talking, press and hold voice transfers from
loudspeaker to mobile phone.
1 Press
SRC
repeatedly to select [BT AUDIO] .
2 Press to start play, press it again to pause.
3 To track up/down, press / .
MENU
To make an outgoing call on this unit, the bluetooth connection
between the unit and the phone must be active.
Remark:
Press to change to "BT AUDIO" mode
EN 9