3
Your Bluetooth speaker can pair with most Bluetooth 2.0 and 2.1 devices. Pairing may vary by devices. Consult
your Bluetooth device’s owner’s manual for pairing instructions.
This is a quick method to connect your Speaker with the latest Paired Device.
Turn on your unit by pressing the key, it will connect with the device automatically, the BT
LED will stay ON when the connection is successful. If the speaker cannot find the latest Device, it will
go to Waiting for Connection mode. Please check that your device (Smartphone) is visible to other
devices refer your device owner’s manual.
1.
2.
PAIRING WITH BLUETOOTH DEVICES
When the speaker is ON, press the once. The speaker will take around 3 seconds to shut down,
the LEDs will turn OFF and remember your Bluetooth device.
TO TURN YOUR BLUETOOTH SPEAKER TO STANDBY MODE
CONNECTING THE LATEST BLUETOOTH DEVICE
If you want to connect another device instead of the current paired one, please make sure the
Bluetooth connection of the current device is turned off.
Disconnect your current playing device, the speaker will change to Waiting for Connection mode, the
BT LED will keep flashing slowly.
Turn ON your Bluetooth device (e.g. Smartphone) Bluetooth setting.
Select the Speaker from your device’s Bluetooth list and push the key for 3 seconds to connect to
the speaker.
The Bluetooth LED will stay Blue when connection is successful. You can play your music wirelessly
with BT Speaker.
You can also connect your paired device under pairing mode.
Under Waiting for Connection mode, you can simply reconnect to your latest paired device by just
pressing the key once.
1.
2.
3.
4.
5.
6.
7.
CONNECTING A PREVIOUSLY PAIRED BLUETOOTH DEVICE
Press key to switch to Bluetooth mode.
Turn on Bluetooth on your device (e.g. Smartphone), Delta 10 will be shown on your device’s
Bluetooth list. Please select.
Press and hold key for 3 seconds until consecutive “beep” sound is played, the Bluetooth LED
will keep flashing RED and BLUE alternatively quickly waiting for your Bluetooth device to pair.
Connect your device to the BT Speaker with Bluetooth, your device menu will show “Connected”, the
Bluetooth LED will stay Blue when pairing is successful.
You can now play your music wirelessly with the BT Speaker.
IMPORTANT PLEASE NOTE: If you wish to connect a different device, please TURN speaker off and then
repeat steps (1-3) for new device.
1.
2.
3.
4.
5.
6.
PAIR
PAIR
PAIR
Please Note:
For mobile phones with Bluetooth 2.0 your device may request you enter a pass code during pairing,
please press 0000.
The Delta 10 can remember up to 8 Bluetooth devices, to clear the memory, press key for 3 seconds
until you hear a “Beep” sound from your speaker, the Bluetooth LED will flash quickly. Then press the key
twice, the Blue LED will stop. When the Blue LED starts flashing again the unit is in pairing mode. You
will need to run through the pairing setup again with your device (e.g. Smartphone).
PAIR
Summary of Contents for DELTA 10B
Page 1: ...DELTA 10B DELTA 10R DELTA 10S User manual...
Page 2: ......
