Connections
Connecting the Line Output
Line Input and Output Connections:
1. Connect the accompanying pin plug cords
between the Line Output terminals of your
Nakamichi 700 and the Tape Monitor
terminals of your stereo amplifier.
2. Connect another pair of the pin plug
cords between the Line Input terminals of
your Nakamichi 700 and the tape
recording terminals of your stereo amplifier.
3 If your stereo amplifier or music system
has a DIN connector socket, connect a single
DIN cable between the DIN Connector
socket on the rear panel of the Nakamichi
700 and its counter part on the
amplifier or music system.
Caution:
Do not use the LINE INPUT/OUTPUT
terminals and DIN Connector socket
simultaneously.
Microphone Connection:
Microphone should be of low impedance
type of 600 ohms.
Connection for the Microphones with
DIN Connectors.
DIN Connector must be of SM type.
Headphone Connection:
The headphones should have an impedance
of 8 ohms.
Connection to Digital Timer:
Set the socket of a timer to "Remote". If
you use a Remote Control, connect to the
Remote Socket of the timer.
3
